Brother TN 3440 reset toner

The following reset procedure should work on the following Brother printers - HL-L5100DN, HL-L5200DW, HL-L6200DW, HL-L6400DW

Open the front cover and leave open while completing the following steps.

1. Push both the SECURE and CANCEL buttons simultaneously.

2. Use the UP and DOWN arrow to select the type of toner you are installing.

3. Push OK to reset the selected toner cartridge.

4. When you see ACCEPTED on the display this indicates that it has been reset.

5. Close the front cover.

Note: If the above procedure still does not reset the toner then you may need to manually reset the position of the cog on the actual toner itself. Please follow the instructions in the link below:

Brother TN3440 manual rest of gears